Zbrain System Z4
      WIKI

ZBrain-System (Z48-C1, Z27-C1) features a standard connector for programming.
This connector features JTAG, FDM-UART and SPI-Bootlines.

A small ProgDongle (38x16mm) interfaces this connector to the JTAG emulator or to an RS232 PC port.

The ProgDongle serves several different functions:

• FDM programming (RS232. Note: DSUB9 RS232 adapter cable needed)
• Emulator connection (JTAG)
• Series production and field updates (On board memory, boot and program from ProgDongle)

Please read Zbrain SDK Z4 Software Manual, chapter 5.11 to learn more about ProgDongle programming.
Software documentation Firmware Update from SD-Card

accessories needed:
- DSUB9 RS232 adapter cable for FDM programming

notes:
- order ProgDongle_STD for Z48-C1, Z27-C1 and custom hardware
- order ProgDongle_ZMC for ZMC
- If using FDM or JTAG, make sure the “boot” jumper is NOT set.