This is an old revision of the document!
ZBrain-System (Z48-C1, Z27-C1) features a standard 2x8pin, 2mm pitch connector for programming.
This connector features JTAG, FDM-UART and SPI-Bootlines.
A small ProgDongle (38x16mm) interfaces this connector to the JTAG emulator or to an RS232 PC port.
The ProgDongle serves several different functions:
accessories needed:
- for FDM programming
notes:
- use ProgDongle_STD for Z48-C1, Z27-C1, custom hardware
- use ProgDongle_ZMC for ZMC
- If using FDM or JTAG, make sure the “boot” jumper is NOT set.