This is an old revision of the document!
Available from Firenze beta 110923
In Mass Storage Device Mode (MSD) you can connect your ZBrain target to a computer and it will present itself as an external hard drive, like a USB-Stick.
Example:
1. Run the following code
2.connect the ZMC via USB cable to your PC
It is strongly recommended, that you have the latest interpreter flashed. (at least firenze 110923).
note:
- the NAND-Flash does not fully support Mass Storage Device
Mass storage Device on NAND-Flash works only in FMD-Mode, which can be used e.g. to store graphics on the flash.