Trouble shooting

Trouble Shooting Cheat Sheet

Symptoms	Possible Reason	Mitigation Strategy	Targets
Power LED dark or Status LED dark when powered up	Insufficient power supplied	Check requirements The Status LED normally goes dark after a few seconds	All
	Target not woken up	Activate trough power on input (GO)	ZSOM-Mini
	RTC Alarm occurred when Target was still running or when no power was supplied.	Remove backup battery	ZSOM-Mini V1.1 (fixed on V1.2)
	Target defect	Contact Schmid Elektronik AG	All
Status LED is flashing	sbRIO9651 is not in standard mode	See Status LED	All
Project cannot connect to the Target	IP Address configured in the project does not match the IP address of the target	To discover or change the IP address of you Target see the ethernet page.	All