User Tools

Site Tools


snippets:no_boot

No Boot

This page describes how the processor can be prevented from booting at power up to reconnect a VDSP-Session.
The processor remains in initial state and does not start any boot process at all.

Follow this steps:

  1. Connect the two pads together with a cable or something
  2. Apply power (or press RESET)
  3. Remove the cable, the processor remains in initial state
  4. Connect VDSP-Session



ZMC



Z48-C1


snippets/no_boot.txt · Last modified: 2017/11/07 22:26 by 127.0.0.1