This is an old revision of the document!
ZSystem supports the following displays:
With resistive touch | ||||
Type | Size/Resolution | ZMC | Z48-C1 | BF527 |
---|---|---|---|---|
SHARP LQ043T1DG01 1) | 4,3“ 480 x 272 | yes | yes | yes |
POWERTIP PH480272T 3) | 4,3” 480 x 272 | yes | yes | yes |
GLYN ET0350G0DH6 4) | 3.5“ 320 x 240 (QVGA) | yes 2) | yes | no |
GLYN ET0430 | 4.3” 480 x 272 | no | not yet | not yet |
GLYN ET0500 | 5.0“ 800 x 480 | no | not yet | not yet |
GLYN ETQ570G0DH6 | 5.7” 320 x 240 (QVGA) | yes 2) | yes | no |
GLYN_ETQ570G2DH6 5) | 5.7“ 320 x 240 (QVGA) | yes 2) | yes | no |
GLYN ETV570G0DHU | 5.7” 640 x 480 (VGA) | yes 2) | yes | no |
GLYN_ETV570G2DHU 5) | 5.7“ 640 x 480 (VGA) | yes 2) | yes | no |
GLYN ET0700 | 7.0” 800 x 480 | no | not yet | not yet |
With capacitive touch | ||||
Type | Size/Resolution | ZMC | Z48-C1 | BF527 |
EDT ETM043005ADH6 | 4,3“ 480 x 272 | no | not yet | yes |
GLYN ETM0430G0DH6 | 4,3” 480 x 272 | no | not yet | not yet |
GLYN ETMQ570G0DH6 | 5.7“ 320 x 240 (QVGA) | no | not yet | not yet |
GLYN ETMQ570G2DH6 5) | 5.7” 320 x 240 (QVGA) | no | not yet | not yet |
GLYN ETMV570G0DHU | 5.7“ 640 x 480 (VGA) | no | not yet | not yet |
GLYN ETMV570G2DHU5) | 5.7” 640 x 480 (VGA) | no | not yet | not yet |
1) not recommended for new designs
2) with display adapter DA-ZMC-GLYN
3) ZMC standard display
4) on DEV-Z48-C1
5) with mounting ears
Vendors:
POWERTIP : www.hus.ch
GLYN : www.glyn.ch
Bezel : http://www.elwoodcontrols.com/id98.html
Notes:
- For BF527 targets ask Schmid Elektronik for detailed information
- The GLYN FamilyConcept uses pin compatible standard connectors.
Download brochure:
Glyn FamilyConcept.pdf (D)
This brochure also provides valuable information about display mounting and EMC.
- Recommended max. display cable length: 150mm