ProgDongle

ZBrain-System (Z48-C1, Z27-C1) features a standard 2x8pin, 2mm pitch connector for programming.
This connector features JTAG, FDM-UART and SPI-Bootlines.

A small ProgDongle (38x16mm) interfaces this connector to the JTAG emulator or to an RS232 PC port.

The ProgDongle serves several different functions:

  • FDM programming (RS232. Note: DSUB9 RS232 adapter cable needed)
  • Emulator connection (JTAG)
  • Series production and field updates (On board memory, boot and program from ProgDongle)



accessories needed:
- DSUB9 RS232 adapter cable for FDM programming


notes:
- order ProgDongle_STD for Z48-C1, Z27-C1 and custom hardware
- order ProgDongle_ZMC for ZMC
- If using FDM or JTAG, make sure the “boot” jumper is NOT set.

 
progdongle_std.txt · Last modified: 2017/11/07 22:26 by 127.0.0.1
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki