ZBrain-System (Z48-C1, Z27-C1) features a standard 2x8pin, 2mm pitch connector for programming.
This connector features JTAG, FDM-UART and SPI-Bootlines.

A small ProgDongle (38x16mm) interfaces this connector to the JTAG emulator or to an RS232 PC port.

The ProgDongle serves several different functions:

• FDM programming (RS232)
• Emulator connection (JTAG)
• Series production and field updates (On board memory, boot and program from ProgDongle)

accessories:
- RS232-DSUB9_Adaptercable for FDM programming

notes:
- use ProgDongle_STD for Z48-C1, Z27-C1, custom hardware
- use ProgDongle_ZMC for ZMC
- If using FDM or JTAG, make sure the “boot” jumper is NOT set.