Differences

This shows you the differences between two versions of the page.

--- progdongle_std [2012/03/23 14:10] – ab
+++ progdongle_std [2017/11/07 22:26] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-===== ProgDongle_STD =====
+===== ProgDongle =====
-ZBrain-System(Z48-C1, Z27-C1,..., exkl. ZMC) features a standard 2x8pin, 2mm pitch connector for programming.\\
+ZBrain-System (Z48-C1, Z27-C1) features a standard 2x8pin, 2mm pitch connector for programming.\\
 This connector features JTAG, FDM-UART and SPI-Bootlines.\\
 \\
-A small ProgDongle (38x16mm)interfaces this connector to the JTAG emulator connector or to an RS232 PC port.
+A small **ProgDongle** (38x16mm) interfaces this connector to the JTAG emulator or to an RS232 PC port.
 The ProgDongle serves several different functions:\\
-  * FDM programming (RS232)
+  * FDM programming (RS232. Note: DSUB9 RS232 adapter cable needed)
-  * emulator connection (JTAG)
+  * Emulator connection (JTAG)
-  * series production and field updates
+  * Series production and field updates (On board memory, boot and program from ProgDongle)
-    (On board memory, boot and program from ProgDongle)
 \\
 {{:hardware:z48_dongle2.png?|}}
+{{:hardware:zmc_with_dongle.png?|}}
+\\
+**accessories needed:**\\
+-  DSUB9 RS232 adapter cable for FDM programming\\
+\\
+**notes:**\\
+- order **ProgDongle_STD** for Z48-C1, Z27-C1 and custom hardware\\
+- order **ProgDongle_ZMC** for ZMC\\
+- If using FDM or JTAG, make sure the "boot" jumper is NOT set.\\