This is an old revision of the document!
ZSystem supports the following displays:
Type | Size/Resolution | Touch | ZMC (24Bit) | Z48C1 (18bit) | BF527 (16bit) | Remarks |
---|---|---|---|---|---|---|
SHARP_LQ043T1DG01 | 4,3“ 480 x 272 | resistive | yes | yes | yes | not recommended for new designs |
POWERTIP_PH480272T | 4,3” 480 x 272 | resistive | yes | yes | yes | ZMC standard display |
GLYN_ETQ570G0DH6 GLYN_ETQ570G2DH6 (with mounting ears) | 5.7“ 320 x 240 (QVGA) | resistive | yes *) | yes | no | |
GLYN_ETV570G0DHU GLYN_ETV570G2DHU (with mounting ears) | 5.7” 640 x 480 (VGA) | resistive | yes *) | yes | no | |
GLYN_ET0350G0DH6 | 3.5“ 320 x 240 (QVGA) | resistive | yes *) | yes | no | on DEV-Z48-C1 |
GLYN_ET0430 | 4.3” 480 x 272 | resistive | no | not yet | not yet | |
GLYN_ET0500 | 5.0“ 800 x 480 | resistive | no | not yet | not yet | |
GLYN_ET0700 | 7.0” 800 x 480 | resistive | no | not yet | not yet | |
GLYN_GETM0430G0DH6 | 4,3“ 480 x 272 | cap multitouch | no | not yet | not yet |
*) with display adapter DA-ZMC-GLYN
Vendors:
POWERTIP : www.hus.ch
GLYN : www.glyn.ch
Notes:
- All displays with resistive touch screen
- The GLYN FamilyConcept uses a pin compatible standard connector.
Download brochure:
Glyn FamilyConcept.pdf (D)
This brochure also provides valuable information about display mounting and EMC.
- Recommended max. display cable length: 150mm