This is an old revision of the document!
ZSystem supports the following displays:
| Type | Resolution | Dimension | ZMC (24Bit) | Z48C1 (18bit) | BF527 (16bit) | Remarks |
|---|---|---|---|---|---|---|
| SHARP_LQ043T1DG01 | 480 x 272 | 4,3“ | 3.0.0 | 3.2.2 | yes | not recommended for new designs |
| POWERTIP_PH480272T | 480 x 272 | 4,3” | 3.2.1 | 3.2.2 | yes | |
| GLYN_ETQ570 | 320 x 240 (QVGA) | 5.7“ | 3.2.1 *) | 3.2.2 | no | |
| GLYN_ETV570 | 640 x 480 (VGA) | 5.7” | 3.2.2 *) | 3.2.2 | no | |
| GLYN_ET0350 | 320 x 240 (QVGA) | 3.5“ | 3.2.2 *) | 3.2.2 | no | on DEV-Z48-C1 |
| GLYN_ET0430 | 480 x 272 | 4.3” | not yet | |||
| GLYN_ET0500 | 800 x 480 | 5.0“ | not yet | |||
| GLYN_ET0700 | 800 x 480 | 7.0” | not yet | |||
*) with display adapter “DA-ZMC-GLYN”
Note:
- All displays with resistive touch screen
- The GLYN FamilyConcept uses a pin compatible standard connector.
Download brochure:
Glyn FamilyConcept.pdf (D)
This brochure also provides valuable information about display mounting and EMC.
- Recommended max. display cable length: 150mm