This is an old revision of the document!


ADC range

On the ZMC hardware the ADC chip can be used in 2 different ranges: -5..+5V an -10..+10V. Default setting is -5V..+5V.
Currently there is no VI to change the range.

As a workaround you can:
A) use a voltage divider to get bigger ranges.
(Please keep in mind the adc input leakage current of app. 1uA)

B) you can use one of the following c-nodes to set the range pin of the ADC group A or group B:
(Only functional when compiled and running in realtime on the target. The range won't be changed while working in FDM mode)
Notes:
- Insert this code after adc open
- The first sample might not have to correct settings

drag and drop this VI snippet into a LabVIEW block diagram.

 
adc_range.1331633802.txt.gz · Last modified: 2017/11/07 22:26 (external edit)
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki