ADC range

On the ZMC hardware the ADC chip can be used in 2 different ranges: -5..+5V an -10..+10V. Default setting is -5V..+5V.
Currently there is no VI to change the range.

As a workaround you can:
A) use a voltage divider to get bigger ranges.
(Please keep in mind the adc input leakage current of app. 1uA)

B) you can use one of the following c-nodes to set the range pin of the ADC group A or group B:
(Only functional when compiled and running in realtime on the target. The range won't be changed while working in FDM mode)
Insert this code after opening the adc.

drag and drop this VI snippet into a LabVIEW block diagram.